WHAT YOU'LL NEED:

  • OEM SCREWS

    Saved from the previous insert. (Gladiator/Ram are supplied)

  • YOUR NORD INSERT

    Of course.

  • SCREWDRIVER

    HAND-TIGHTEN ONLY.

    DO NOT USE POWER-TOOLS.

    (Your plastic mounts could break)

    Phillips or Flat-Head, depending on screw.

STEP 1: LEAVE THE OEM INSERT IN PLACE

Do not remove the OEM tailgate insert. The original insert will stay in place during the installation of your new Nord tailgate insert.

Remove OEM screws (keep for F150's)

Use supplied screws and spacers (for Gladiator & Ram)

Underlay (for 2022-2025 Tundra's)

STEP 2: POSITION THE NEW INSERT

Place underlay on tailgate (2022-2025 Tundra's)

Place Spacers on top of holes. Make sure they are sitting right on top of the hole. (Spacers are for Ram & Gladiators only)

Carefully align your new Nord tailgate insert over the OEM insert, making sure it's positioned securely on top. Make sure the spacers stay in place. (Spacers are for Ram & Gladiators only)

Ensure that the new insert lines up properly with the holes of the tailgate for a flush and secure fit.

STEP 3: SCREW INTO PLACE

Install with supplied screws (use OEM screws for F150's) 

Insert and secure the new Nord tailgate insert by fastening the screws through the holes in the Nord insert and into the tailgate.

STEP 4: TIGHTEN THE SCREWS

Tighten all screws evenly. HAND TIGHTEN ONLY. Ensure the insert is securely mounted to the tailgate.

STEP 5: READY FOR ACTION

Now that your Nord Products Tailgate Insert is installed, you’re ready to take on any adventure! Whether you’re using it as a filleting table, tool bench, or camping surface, your new insert is built to handle all your needs.